Surface Disinfection
UV-C battens with sensors
Fixed installation of UV-C luminaries with a control system.
Our design team calculates the required time and dose for disinfection.
Claim/USP/Differentiator
- Partially open equipment safeguard Linear UV-C disinfection luminaire.
- 5M range microwave sensor with startup delay function for improved safety.
- Reflector & parabolic lamellas to limit UV – C irradiance in line with sensor
- detection area to improve safety.
- Flashing during disinfection cycle to provide visual warning.
- UVC Philips UVC lamp (253.7nm) , no Ozone.
UV-C battens without sensors
The responsibility to switch the UV-C lighting ON lies with an authorized operator.
The control system implements a safety net to prevent usage with people present.
Required devices to implement a safe system operation are:
Authorized Activation Panel
Luminaire on/off control
Safety checks
Status feedback
Presence sensor: Independent mount
Door sensor
Emergency kill switch
Activation warning (light or sound)
Control solution for UVC surface disinfection systems
The responsibility to switch the UV-C
lighting ON lies with an authorized
operator.
The control system implements a safety
net to prevent usage with people present.
Required devices to implement a safe system operation are:
• Authorized Activation Panel
- Luminaire on/off control
- Safety checks
- Status feedback
• Presence sensor: Independent mount
• Door sensor
• Emergency kill switch
• Activation warning (light or sound)
Dynalite UVC Control system
The responsibility to switch the UV-C lighting ON lies with a certified operator.
- Key activation
- Dose/Time adjustment on UI
The control system implements a safety net to prevent usage with people present.
- Door sensor(s) on doors
- Occupancy sensor(s) in room
- Signaling lights
- Emergency stop in room
The control system provides fault tolerance.
- Hard user activation of the power
- Hard emergency stop on controller
- System fault and device-on-line checked periodically
- System logging